• 公司动态

    爱泽工业2018年4月部分到货产品专题及库存——MR CHEMIE渗透剂、磁悬液、清洁剂篇

    2018-04-20 20:29:15

    MR CHEMIE清洁剂、显像剂、磁悬液 爱泽工业izeindustries到货图集

    德国MR CHEMIE清洁剂MR85产品描述
    General appearance and composition:
    Mixture of solvents based on alcohol, method C according to EN ISO 3452-1
    Dries slowly
    Flash point material +13 °C
    Suitable for all metals (suitability for plastics needs testing prior to use)
    Processing temperature -10 to +50 °C
    Aerosol can overhead sprayable

    Relevant approvals and specifications
    Sample testing acc. to EN ISO 3452-2 and ISO 3452-6
    Low content of halogens and sulphur according to EN ISO 3452-2
    and ASME Code V, Section V, Article 6
    In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted
    by Framatome ANP

    Application:
    Remove tinder, rust and other contaminations from surface in a suitable manner.
    You can use MR85 Remover as precleaner for removal of oils or fats.Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding
    or dipping. Allow to penetrate for at least 5 minutes.Remove excess MRPenetrant from surface using a clean lint-free cloth lightly
    moistened with MR85 Remover.Spray MR Developer (e.g. MR70) from a distance of approx. 20 cm on the dry
    surface, achieving a thin, uniform layer. Depending on the used penetrant, surface
    defects will appear as red or fluorescent indications. Please note: If the developer
    layer is too thick tiny discontinuities will not appear through the developer.

    Minimum shelf life:
    Will keep for a minimum of 4 years, stored at room temperature
    Pack sizes:
    Aerosols, 500 ml (1 box contains 12 aerosols)
    5 L, 30 L, 200 L
    Valve pen (Piccolo-Pen)


    MR CHEMIE清洁剂MR85爱泽工业izeindustries发货照片

    爱泽工业(IZE_INDUSTRIESMR CHEMIE)特价经销、常用备件型号:
    MR CHEMIE清洁剂MR79
    MR CHEMIE清洁剂MR85
    MR CHEMIE清洁剂MR88
    MR CHEMIE清洁剂MR91

    德国MR CHEMIE显像剂MR70产品描述
    General appearance and composition:
    Solvent removable developer for red and fluorescent penetrant testingform d and e according to EN ISO 3452-1
    Water mixable
    Dries quickly
    Processing temperature -30 °C to +50 °C
    Aerosol overhead sprayable

    Relevant approvals and specifications
    Sample testing acc. to EN ISO 3452-2 and EN ISO 3452-6
    Low content of halogens and sulphur according to EN ISO 3452-2and ASME Code V, Section V, Article 6
    In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas,admitted by Framatome ANP
    Produits et Matériaux Utilisables en Centrales (PMUC)
    TLV 9017 01:2011-01

    Application:
    Remove tinder, rust and other contaminations from surface in a suitable manner. A
    possible precleaner for removal of oils or fats is e.g. our remover MR 79.
    Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding
    or dipping. Allow to penetrate for at least 5 minutes.
    Remove excess MRPenetrant from surface either using water or a clean lint-free
    cloth lightly moistened with an MR Remover.
    Spray MR 70 Developer from a distance of approx. 20 cm on the dry surface,
    achieving a thin, uniform layer. Depending on the used penetrant, surface defects
    will appear as red or fluorescent indications. Please note: If the developer layer istoo thick tiny discontinuities will not appear through the developer.
    When using a spray gun connected to compressed air it must be ensured that the
    supplied air is free of water and fat.

    Minimum shelf life:
    Will keep for a minimum of 4 years, stored at room temperature
    Pack sizes:
    Aerosols, 500 ml (1 box contains 12 aerosols)
    5 L, 30 L
    Valve pen


    MR CHEMIE显像剂MR70爱泽工业izeindustries发货照片

    爱泽工业(IZE_INDUSTRIESMR CHEMIE)特价经销、常用备件型号:
    MR CHEMIE显像剂MR70
    MR CHEMIE显像剂MR81
    MR CHEMIE显像剂MR703W
    MR CHEMIE显像剂MR703WK

    MR CHEMIE磁悬液MR76S composition:
    Mixture of isoparaffinic carbonhydroxides, additives and pigments
    Serves to indicate cracks when performing coloured magnetic particle inspection
    Medium particle size da = 1-3 m
    Flashpoint 84°C
    Sediment: 0,4 – 0,8 ml/100 ml (1 h)
    Low odour
    Aerosol cans over head sprayable

    MR CHEMIE磁悬液MR76S的组成:
    异链烷烃碳氢化合物,添加剂和颜料的混合物
    用于在进行彩色磁粉检查时表示裂纹
    中等粒径:da = 1-3 m
    闪点84°C
    沉淀物:0.40.8ml / 100ml(1小时)
    低气味
    气溶胶罐头可喷雾


    MR CHEMIE磁悬液MR76S爱泽工业izeindustries发货照片

    爱泽工业(IZE INDUSTRIES)特价经销、常用备件型号:
    MR CHEMIE渗透剂MR67
    MR CHEMIE渗透剂MR67DL
    MR CHEMIE渗透剂MR67PS
    MR CHEMIE渗透剂MR68NF
    MR CHEMIE渗透剂MR68H
    MR CHEMIE渗透剂MR68C
    MR CHEMIE渗透剂MR312
    MR CHEMIE渗透剂MR311-R
    MR CHEMIE渗透剂MR313
    MR CHEMIE渗透剂MR313DL
    MR CHEMIE渗透剂MR699FA
    MR CHEMIE渗透剂MR660
    MR CHEMIE渗透剂MR670F
    MR CHEMIE渗透剂MR671F
    MR CHEMIE渗透剂MR672F
    MR CHEMIE渗透剂MR673F
    MR CHEMIE渗透剂MR70
    MR CHEMIE渗透剂MR70H
    MR CHEMIE渗透剂MR81T-R
    MR CHEMIE渗透剂MR703W
    MR CHEMIE渗透剂MR703WK
    MR CHEMIE渗透剂MR79
    MR CHEMIE渗透剂MR85
    MR CHEMIE渗透剂MR88
    MR CHEMIE渗透剂MR91H
    MR CHEMIE渗透剂MR3001
    MR CHEMIE渗透剂MR3002


    MR CHEMIE清洁剂、显像剂、磁悬液 爱泽工业izeindustries到货图集

    以上为本月部分到货MR CHEMIE产品,爱泽工业*提供MR CHEMIE全系列产品,MR CHEMIE清洁剂MR85,MR CHEMIE显像剂MR70,MR CHEMIE磁悬液MR76S等等。

    如果您有任何关于产品的相关疑问,请随时与我们联系,爱泽工业(021-3100 6702)。我们将尽全力解决您的问题。

    If you have any question for MR CHEMIE, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.

    留言
    杨文 女士
    销售专员
    谷瀑服务条款》《隐私政策
内容声明:谷瀑为第三方平台及互联网信息服务提供者,谷瀑(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过谷瀑与店铺经营者沟通确认;谷瀑上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在谷瀑首页底栏投诉通道进行投诉。
上海爱泽工业设备有限公司 电话:021-31006702 手机:18917501433 地址: 上海市杨浦区纪念路8号财大科技园1号楼201
Copyright ©2003 - 2024 Goepe.com 版权所有 关于谷瀑 | 服务中心 | 著作权与商标声明 | 会员服务 | 隐私声明 | 网站导航