MARCO遥控阀BLASTMATER 153

Marco成立于1944年，是美国和国际工业，基础设施和下游能源市场工业承包商的表面处理设备和消耗品的制造商。Marco为工业承包商提供全面的磨料，喷砂设备，涂层设备，工程系统，租赁设备和安全产品。Marco还为定制解决方案提供维修和内部工程设计的现场服务。

MARCO主营产品：过滤器，空气软管，泵，电动工具，吸尘器，除尘器，检测仪，高炉柜，计量阀，喷嘴，磨具，防护服，干燥器，分离器，清洗机，连接器，夹具，防尘袜，刷子，滚筒，喷涂设备，开关，联主器等。

MARCO遥控阀BLASTMATER 153主要特点

符合OSHA标准的

弹簧辅助杆 

铸铁阀体 

可拆卸盖板 

包括喷嘴盖

MARCO遥控阀BLASTMATER 153描述

遥控阀使操作员能够远程启动和停用喷砂喷嘴处的空气和磨料流。这提高了生产率，并消除了对锅的要求。Blastmaster 153远程控制阀是符合OSHA标准的喷砂软管末端截止阀。当弹簧辅助杆移动到爆破位置时，喷砂软管中的空气和磨料混合物被释放，使其离开喷砂喷嘴。当释放杠杆时，它返回到非喷射位置，停止离开喷砂喷嘴的空气和磨料混合物的流动。典型应用包括纪念碑雕刻，修补工作，汽车修复和建筑设备维护。常用的磨料包括氧化铝，石榴石，

减少磨损消费

Blastmaster 153远程控制阀允许操作员在操作员重新定位期间激活和停用喷嘴处的磨料流，从而减少磨料消耗，磨蚀成本，清洁劳动力和处理成本。

增强安全性

OSHA要求喷砂锅配备遥控系统，该系统仅在连续手压下操作，并在操作员释放控制开关后立即关闭（29 CFR 1910.244（b））。该远程控制系统通过提供“失效保护”配置满足OSHA要求，该配置将在操作员跌落或失去对软管端关闭的控制时停用远程控制系统。

KEY FEATURES

OSHA-compliant

Spring-assisted lever 

Cast iron valve body 

Removable cover 

Includes Nozzle Cap

The remote control valve gives an operator the ability to remotely activate and deactivate the flow of air and abrasive at the abrasive blasting nozzle. This increases productivity and eliminates the need for a pot tender. The Blastmaster® 153 Remote Control Valve is an OSHA-compliant abrasive blasting hose-end shutoff valve. When the spring-assisted lever is moved to the blasting position, the air and abrasive mixture in the abrasive blasting hose is released, allowing it to exit the abrasive blasting nozzle. When the lever is released, it returns to the non-blasting position, deactivating the flow of the air and abrasive mixture exiting the abrasive blasting nozzle. Typical applications include monument engraving, touch-up work, automobile restoration, and construction equipment maintenance. Common abrasives used include aluminum oxide, garnet, glass bead, mineral abrasives, and staurolite.

REDUCED ABRASIVE CONSUMPTION

The Blastmaster® 153 Remote Control Valve allows the operator to activate and deactivate the flow of abrasive at the nozzle during operator repositioning, reducing abrasive consumption, abrasive costs, clean-up labor, and disposal costs.

ENHANCED SAFETY

OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). This remote control system meets the OSHA requirement by providing a “Fail-to-Safe” configuration, which will deactivate the remote control system in the event the operator drops or loses control of the hose-end shutoff.

爱泽工业(IZE_INDUSTRIES)特价经销、常用MARCO遥控阀型号：

MARCO遥控阀BLASTMATER 153

MARCO遥控开关BLASTMATER 152P

MARCO遥控开关BLASTMATER 151E

MARCO遥控开关BLASTMATER 150P

MARCO遥控开关BLASTMATER 155E

MARCO遥控开关BLASTMATER 156E

MARCO遥控开关BLASTMATER 157E

MARCO遥控开关BLASTMATER 158P

爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于MARCO遥控阀BLASTMATER 153的疑问，请随时致电我们，爱泽工业（ ）。我们将尽全力解决您的问题。

有关MARCO遥控阀BLASTMATER 153更详细的信息或者美国MARCO相关产品，请致电爱泽工业。

If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.

MARCO遥控阀BLASTMATER 153描述及特点