爱泽工业2023年5月部分到货产品专题及库存——PH电极篇

如下为我司爱泽工业IZE_Industries本月到货ABB相关产品，欢迎致电索取样本资料和产品信息。


ABB PH电极TB556.J.1.E.15.T.20        


ABB PH电极TB556.J.1.E.20.T.30
 

ABB PH电极TB557.J.1.D.B.1.T.20.0      


ABB PH电极TB557.J.3.E.A.2.T.29
 

ABB PH电极TB564.J.3.E.0.0.T.29
  ABB电极TB26.010.1.1.1.0.0.0.4.0.2
 

ABB PH电极TB557.1.3.6.B.1.T.20 


ABB PH电极TB557.1.3.D.B.1.T.20


ABB电极AW501035


ABB钠电极1048836
 
ABB PH电极TB556系列介绍及选型
TB556 传感器是螺纹式传感器，适合浸没（浸入）和插入工艺管道。
 
安装螺纹尺寸为 3/4 英寸 NPT。 该传感器有多种插入长度可供选择，从标准的 40 毫米（1.5 英寸）到*大 127 毫米（5 英寸）。 传感器主体由耐化学腐蚀的 Kynar (PVDF) 模制而成。
 
TB556 sensors are threaded style sensors suitable for submersion (immersion) and insertion into the process pipes.
 
Mounting thread size is 3/4 in. NPT. The sensor is available in several insertion lengths from the standard 40 mm (1.5 in.) to a maximum of 127 mm (5 in.). The sensor body is molded from chemically resistant Kynar (PVDF).
 


ABB PH电极TB557系列介绍及选型
TB557 传感器是热插拔球阀插入式传感器。 它们可以在不中断过程的情况下维护或更换传感器。
 
传感器设计中集成了一个完整的安全防爆唇，可防止意外拆卸传感器。 与链条约束不同，这种安全设计是传感器结构的一个组成部分。
 
传感器通过单独出售的标准 11/2 英寸或 11/4 英寸全通径球阀插入。 与球阀的连接是通过压缩接头实现的，可以用 11/4 英寸 NPT 螺纹用手拧紧，也可以用 1 英寸 NPT 螺纹用扳手拧紧。
 
额外的配件使组件能够在原位冲洗和排放，并使用 11/2 英寸 NPT 螺纹连接到球阀。
 
TB557 sensors are hot-tap, ball valve insertion sensors. They enable sensor maintenance or replacement without interrupting the process.
 
An integral safety anti-blowout lip is incorporated into the sensor design, preventing accidental sensor removal. Unlike chain restraints, this safety-by-design is an integral part of the sensors' construction.
 
The sensor is inserted through a standard 11/2 in. or 11/4 in. full port ball valve which is sold seperately. Connection to a ball valve is by compression fitting available in either hand-tight with 11/4 in. NPT threads or wrench-tight with 1 in. NPT threads.
 
Additional fittings enable the assembly to be flushed and drained in situ and use a 11/2 in. NPT thread for connection to the ball valve.
 


ABB PH电极AP300系列介绍及选型
AP300 系列 pH/氧化还原传感器为大多数工业 pH 应用提供可靠且经济高效的解决方案。
 
AP300 将测量、参考和温度补偿元件组合在一个单元中，是适用于各种工业应用的经济型解决方案； 包括水、食品、药品和化学品。
 
AP300 探头提供三种不同的主体类型，使传感器可用于浸入式、插入式/流通式和热插拔应用。
 
“Hot-tap”传感器变体可以通过标准的全端口球阀进行安装和缩回，从而将维护成本降至*低。
 
The AP300 range of pH/Redox sensors offers a reliable and cost-effective solution for most industrial pH applications. It is the perfect starting point for pH or Redox measurements.
 
Combining measurement, reference and temperature compensation elements in a single unit, the AP300 is an economical solution for a wide variety of industrial applications; including water, food, pharmaceutical and chemical.
 
The AP300 probe is available in three different body types enabling the sensor to be used in immersion, insertion/flowthrough and hot-tap applications.
 
The ‘Hot-tap’ sensor variant enables fitting and retraction through a standard, full-port ball-valve keeping maintenance costs to a minimum.
 


ABB PH电极TB26 系列介绍及选型
TB26 传感器可通过集成的 3/4 英寸 NPT 螺纹轻松安装到工艺管线和容器中，通过 1/2 英寸 NPT 背螺纹直接浸入管线和容器中，或通过球插入工艺管线或容器中。
 
球阀在传感器和过程之间提供隔离，允许在管线或容器满时插入和移除传感器。 这是通过使用 11/2 英寸标准球阀实现的。
 
带有冲洗端口的压缩接头使操作员能够在卸下传感器后冲洗掉任何残留的过程流体。 冲洗口还提供了一个快速方便的地方来抓取样本进行校准。
 
可变传感器长度适用于所有 TB26 传感器类型。 热插拔传感器可与压缩接头一起使用，无需球阀，以提供更大的安装灵活性。
 
TB26 sensors are easily installed into process lines and vessels via the integral 3/4 in NPT threads, submersed directly into lines and vessels via the 1/2 in NPT backthreads, or inserted into a process line or vessel through a ball valve.
 
The ball valve provides isolation between the sensor and the process, allowing sensor insertion and removal while the line or vessel is full. This is accomplished by using a 11/2 in standard ball valve.
 
A compression fitting with flushing ports enables the operator to wash away any left-over process fluid after removing the sensor. The flushing ports also provide a quick and easy place to take a grab sample for calibration.
 
Variable sensor lengths are available for all TB26 sensor styles. The hot tap sensor can be used with the compression fitting and without the ball valve to provide even greater installation flexibility.
 


ABB PH电极TB564系列介绍及选型
TB564 是高压、热插拔、球阀、插入式传感器。 它们允许在不中断过程的情况下维护或更换传感器。
 
出于安全原因，建议在插入和缩回传感器组件期间将工作压力降低到 690 kPa (100 psi) 以下。
 
TB564 are high pressure, hot-tap, ball valve, insertion sensors. They permit sensor maintenance or replacement without interrupting the process.
 
For safety reasons, it is recommended that the operating pressure be reduced below 690 kPa (100 psi) during insertion and retraction of the sensor assembly.
 


ABB PH电极AC221系列介绍及选型
AC221 电导池设计用于插入发电厂、离子交换器、反渗透和芯片清洁应用中的管道、容器和工艺样品管线。这些电池由不锈钢电极构成，具有极化抗性，几乎不需要维护。有多种电缆连接方法可供选择，包括可消除错误连接的可拆卸连接器。临界温度测量包括不到 30 秒的响应，可实现快速补偿和远程输出。
 
The AC221 conductivity cell is designed for insertion in pipelines, vessels and process sample lines in power plants, ion-exchangers, reverse osmosis and chip cleaning applications. The cells are constructed with stainless steel electrodes and are resistant to polarization, requiring virtually no maintenance. A choice of cable connection methods is available, including a detachable connector that eliminates incorrect connections. Critical temperature measurement is included with a world-beating response of less than 30 seconds, enabling rapid compensation and remote output.
 


ABB PH电极常用型号：
ABB TB556.J.1.E.15.T.20
ABB TB556.5.0.6.15.F.10
ABB TB556.J.3.E.50.T.30
ABB TB556.1.3.B.11.T.30
ABB TB557.1.3.6.71.T.20
ABB TB556.J.3.D.15.T.30
ABB TB556.J.4.E.00.F.30
ABB TB556.1.3.D.15.T.20
ABB TB556.J.1.E.15.T.20
ABB TB556.J.1.E.00.T.20
ABB TB556.J.1.E.15.T.30.TS
ABB TB556.J.3.E.15.T.30.0
ABB TB557.J.3.E.B.1.T.20.0
ABB TB557.J.1.E.7.4.T.20
ABB TB557J4EB3F20
ABB TB55713671T20
ABB TB557J1DB1T09
ABB TB55711DB1T20
ABB TB557J1EB1T20
ABB TB5571D131T17
ABB TB557.J.1.E.7.4.T.20
ABB AP303/21020001/STD
ABBAP30.5./1.1.0.2.0.22.1./STD
ABB AP30.3/21030000/STD
ABB AP30.3/50020000/STD
ABB AP30.3/21001000/STD
ABB AP30.5/11020001/STD
ABB AP30.3/21020001/STD
ABB TB564.J.3.E.0.0.T.29
ABB TB564.J.1.E.0.9.T.29
ABB TB564-31600F25
ABB TB564-J1E00F20
ABB TB564J1E09T20
ABB TB564.J.1.E.0.9.T.20
ABB TB564J3E00T20
ABB TB564J3E00T29T29SR5711US
ABB TB564J3E00T29
ABB TB564.J.1.E.0.9.T.29
ABB TB26.010.1.1.1.0.0.0.4.0.2
ABB TB264.001111010022
ABB TB26010111000402
ABB TB26.001.1.1.1.0.4.2.4.0.2 ZJ
ABB TB2641.00111010022
ABB TB264010111010052
ABB AC221/211341
ABB AC221/211131/STD
ABB AC221/211341
ABB AC221/211131/ STD
ABB AC221/231131/STD
ABB AC221211131/TB82TE2010412
ABB AC221/231131/STD GL10 3TA K=0.1
ABB AW501 030
ABB AW501 035
ABB AW501 053
ABB AW501 077
ABB AW501 058
ABB AW501 062
ABB AW501 066
ABB AW501 068
ABB AW501030
ABB AW501035
ABB AW503300
ABB 1048836
ABB 1048836
ABB 1436836
ABB 8036040
ABB 8036235
ABB 0214047
ABB 0214048
ABB 0214526
ABB 0216451
ABB 0216452
ABB 0216453
 
如果您需要完整的ABB的相关技术咨询，请随时致电爱泽工业，或者访问网站,我们将尽全力解决您的问题。