ETAS总线接口ES582.2

ETAS成立于1994 年，为Robert Bosch GmbH的子公司

ETAS总线接口ES582.2技术参数

ETAS总线接口ES582.2系列介绍

ES582 – USB CAN FD 总线接口

ES582.2 模块是一种双通道、紧凑且经济高效的 CAN FD 接口。该模块是一种具有灵活数据速率支持的解决方案，用于将 PC 或笔记本电脑连接到车辆 CAN（控制器局域网络）总线或车辆上各个电子控制单元 (ECU) 的 CAN 端口。

ES582 模块通过 USB 连接到 PC 或笔记本电脑。该模块由 PC 或笔记本电脑供电，无需外部电源。安装和配置只需*少的努力。

测量数据由 ES582 模块记录。所有 ES582 测量数据都由 INCA 与来自其他 ECU 和测量模块的信号精确同步。除了测量 ECU 信号外，INCA 还可以使用 ES582 模块校准 ECU 参数、重新编程 ECU 的闪存或进行 ECU 诊断。

CAN FD SIC（信号改善能力）

CAN FD SIC（具有灵活数据速率和信号改善能力的收发器的 CAN）是博世开发的改进的向后兼容 CAN 协议。与 CAN 的主要区别在于，每条消息的有效载荷数据从 8 个字节增加到 64 个字节，传输速度高达 8 Mbit/s，校验和更长，从而提高了传输可靠性。CAN FD SIC 满足了汽车行业对更高网络带宽的需求。同时，CAN FD 节点可以轻松集成到现有的 CAN 基础设施中。

优点

紧凑且经济高效的双通道 CAN FD SIC 总线接口，适用于 PC

支持符合 ISO 和不符合 ISO（CAN FD V1）版本的 CAN FD 协议

Y 型电缆用于连接交付中包含的接口模块的两个 CAN 通道

通过 USB 接口简单直接地连接到主机 PC

针对测量数据记录、ECU 校准、诊断和闪存编程任务进行了优化

与 INCA 完全集成

CAN 接口和主机 PC 的电气隔离

ES582 支持 CAN FD，是传统 CAN 和 CAN FD 领域广泛应用的理想工具。例如，它可以通过诊断服务端口连接到车辆 CAN。ES582 支持所有 CAN 协议，例如 INCA 使用的 CCP、XCP、KWP-on-CAN 和 UDS。协议 CCP 和 KWP-on-CAN (ISO14230/ISO15765) 仅在 CAN 模式下受支持。

对于车辆验证，用于 ECU 诊断的 INCA 附加组件 ODX-LINK 可以使用 ES582 访问 OBD-on-CAN 功能以及读取和清除诊断故障代码 (DTC)，从而有效地消除了使用单独诊断服务工具的需要。ES582 还提供 SAE J2534 直通接口，用于车辆诊断和使用第三方应用程序重新编程。

ES582 – USB CAN FD Bus Interface

The ES582.2 module is a dual-channel, compact and cost effective CAN FD interface. The module is a solution with flexible data rate support for connecting the PC or notebook to vehicle CAN (Controller Area Network) busses or the CAN port of individual electronic control units (ECU) on the vehicle.

The ES582 module connects with a PC or notebook over USB. The module gets power supply by the PC or notebook and no external power supply is needed. Installation and configuration require only minimum effort.

Measurement data are recorded by the ES582 module. All ES582 measurement data are accurately synchronized by INCA with signals from other ECUs and measurement modules. In addition to measuring ECU signals, INCA can use the ES582 module to calibrate ECU parameters, to reprogram an ECU’s flash memory, or for ECU diagnostics.

CAN FD SIC (Signal Improvement Capability)

CAN FD SIC (CAN with flexible data rate and signal improvement capable transceiver) is an improved, backward-compatible CAN protocol developed by Bosch. The principal differences to CAN consist in the increased payload data per message from 8 up to 64 bytes, the higher transmission speeds of up to 8 Mbit/s, and the longer checksums, which enhance transfer reliability. CAN FD SIC meets the automotive industry’s need for higher bandwidth for networks. At the same time, CAN FD nodes can be easily integrated into existing CAN infrastructure.

Benefits

Compact and cost-effective dual channel CAN FD SIC bus interface for PC

Supports both ISO-conform and non-ISO-conform (CAN FD V1) Version of the CAN FD protocol

Y-cable for connecting both CAN channels of the interface module included in the delivery

Simple and direct connection to the host PC via USB interface

Optimized for recording of measurement data, ECU calibration, diagnostics, and flash programming tasks

Fully integrated with INCA

Electrical isolation of CAN interface and host PC

The ES582 with its CAN FD support is an ideal tool for a wide range of applications for both in classical CAN and in CAN FD area. For example, it can be connected to a vehicle CAN via the diagnostics service port. The ES582 supports all CAN protocols, e.g CCP, XCP, KWP-on-CAN, and UDS used by INCA. The protocols CCP and KWP-on-CAN (ISO14230/ISO15765) are only supported in CAN mode.

For vehicle validation, ODX-LINK, the INCA add-on for ECU diagnostics, can use the ES582 to access OBD-on-CAN functionality as well as to read and clear Diagnostic Trouble Codes (DTCs), effectively eliminating the need for the use of a separate diagnostic service tool. ES582 also provides a SAE J2534 Pass Thru Interface for vehicle diagnostics and reprogramming with third party applications.
 

ETAS总线接口其他常用型号：

ETAS ES582.2

ETAS ES583

ETAS ES584

ETAS Brake disc NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于ETAS总线接口ES582.2的疑问，请随时致电我们，爱泽工业（ ）。我们将尽全力解决您的问题。

If you have any question for ETAS products, please feel free to dial 0086-21-3100 6702/ send request email to / browse our website: www.ize-industries.com.
 

ETAS总线接口ES582.2参数介绍