MILLIPORE过滤器MPGP04001

MILLIPORE致力于使研究和生物技术生产更简单，更快，更安全。

MILLIPORE过滤器MPGP04001规格

描述

通用说明

Millipak® 0.22 μm亲水性膜滤器在Milli-Q® Integral、Milli-Q® Advantage A10、Milli-Q® Direct、Milli-Q® Reference和Milli-Q® Reference A+ 水净化系统的取用点产生无颗粒和无细菌的纯净水。该滤器采用0.22 μm PES（聚醚砜）非对称膜滤芯，热封在苯乙烯丙烯腈外壳上，有效减少有机和无机可溶物的释放。  

应用

适用于大多数实验室分析技术所需的过滤水（如分光光度法溶液制备、pH测量、滴定、原子吸收、凯氏定氮分析及HPLC等）。  

特点与优点  

膜片由支撑的刚性塑料盘支持，带有通道，确保高水流量和抗压力变化能力，同时避免膜破裂风险。

使用独特的堆叠盘设计，*小化残留体积和颗粒脱落。

由0.22 μm PES非对称膜滤芯热封在SAN（苯乙烯丙烯腈）外壳上。

锥形孔径的膜允许在低压差下实现高流速。

选用的膜、外壳材料和制造工艺旨在*大程度地减少有机和无机可溶物的释放。

连接到水点出口，例如Milli-Q®水净化系统的出水端口。

保护罩可在取水过程中防止空气中细菌污染。

每个滤器都经过单独测试，并附有质量证书。

维护简便：易于安装和更换。

组成部分  

0.22 μm 膜滤器

Description

General description

The Millipak® 0.22 μm hydrophilic membrane filter produces particulate- and bacteria-free water at the point of dispense of the Milli-Q® Integral, Milli-Q® Advantage A10, Milli-Q® Direct, Milli-Q® Reference and Milli-Q® Reference A+ water purification systems. The filter is designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter, heat-sealed on a styrene acrylonitrile housing. This minimizes organic and inorganic extractable release.

Application

Provides filtered water suitable for most analytical techniques used in the laboratory (e.g., preparation of solutions used in spectrophotometry, pH measurement, titrations, atomic absorption, Kjeldahl analysis, and HPLC).

Features and Benefits

The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.

Millipak® membrane filters use the unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.

The filters are designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a SAN (styrene acrylonitrile) housing.

The membrane′s conical pores allow a high flow rate at a low differential pressure.

The membrane, housing material and production processes have been selected to minimize organic and inorganic extractable release.

Connects to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.

The protective bell protects against intrusion of airborne bacteria contamination during dispensing.

Each filter is individually tested and delivered with a Certificate of Quality.

Care-free maintenance: the filter is easily fitted and replaced.

Components

0.22 μm membrane filter

MILLIPORE过滤器其他常用型号：

MILLIPORE MPGP04001

MILLIPORE MPGP002A1

MILLIPORE MPGP02001

MILLIPORE MPGL10ZW1

MILLIPORE MPGP002A1

MILLIPORE MPGP02001

MILLIPORE MPGL10ZW1

MILLIPORE Filters NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于MILLIPORE过滤器MPGP04001的疑问，请随时与我们沟通（ ）。我们将尽全力解决您的问题。

If you have any question for MILLIPORE products, please feel free to dial 0086-21-3100 6702/ send request email to / browse our website: www.ize-industries.com.

MILLIPORE过滤器MPGP04001介绍